How to Chop Logs





Practise on small, slender logs, chopping them in short lengths until

you understand something of the woodsman's art of "logging up a tree";

then and not until then should you attempt to cut heavier wood.



If you are sure-footed and absolutely certain that you can stand firmly

on the log without teetering or swaying when leaning over, do so. You

can then chop one side of the log half-way through and turn around and

chop the other side until the second notch or "kerf" is cut through to

the first one on the opposite side, and the two pieces fall apart. While

working stand on the log with feet wide apart and chop the _side_ of the

log (not the top) on the space in front between your feet. Make your

first chip quite long, and have it equal in length the diameter of the

log. If the chip is short, the opening of the kerf will be narrow and

your hatchet will become wedged, obliging you to double your labor by

enlarging the kerf. Greater progress will be made by chopping diagonally

across the grain of the wood, and the work will be easier. It is

difficult to cut squarely against the grain and this is always avoided

when possible. After you have cut the first chip in logging up a tree,

chop on the base of the chip, swinging your hatchet from the opposite

direction, and the chip will fall to the ground.



Having successfully chopped off one piece of the log, it will be a

simple matter to cut off more. Chop slowly, easily, and surely. Don't be

in a hurry and exhaust yourself; only a novice overexerts and tries to

make a deep cut with the hatchet.



Be careful of the blade of your hatchet; keep it free from the ground

when chopping, to avoid striking snags, stones, or other things liable

to nick or dull the edge.





How to Build a Fire How to Chop Wood facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback